跳到主要内容

Macro by Mark 的 Cookie.我们使用必要 Cookie 处理登录、语言和安全。经您同意,我们还会将可选 Cookie 用于保存偏好、分析,以及通过 Meta(Facebook)Pixel 衡量广告效果。请阅读我们的Cookie 政策。

Macro by MarkMacro by Mark
  • 首页
加载中…
加载中…
← 模型
Macro概念政策模型

Leontief input-output Model

Empirical input-output table accounting that traces how a final demand change ripples through inter-sector requirements.

概述图表数学参考资料

Understand the mathematics

Follow the same equations and assumptions one section at a time or in a continuous reading.

Hover or focus a symbol defined in this model to find its exact matches. Select it to keep the highlight; Escape clears the selection.

The Leontief System and the Existence of the Inverse

The input-output model starts from an accounting identity and a behavioral assumption (fixed technical coefficients). Solving the resulting linear system yields the Leontief inverse, whose existence requires the economy to be productive.

The power-series representation provides economic intuition: each term corresponds to one round of inter-industry demand.

xi=∑j=1nzij+difor i=1,…,nx_i = \sum_{j=1}^n z_{ij} + d_i \quad \text{for } i = 1, \ldots, nxi​=j=1∑n​zij​+di​for i=1,…,n
nnn

Accounting identity. Sector iii's total output equals its intermediate sales to all sectors plus its final demand.

aij=zij/xj  ⟹  zij=aijxja_{ij} = z_{ij} / x_j \implies z_{ij} =a_{ij} x_jaij​=zij​/xj​⟹zij​=aij​xj​

Fixed technical coefficients. The intermediate demand from sector iii by sector jjj is proportional to jjj's output.

x=Ax+d  ⟹  (I−A)x=d  ⟹  x=(I−A)−1d=Ldx = Ax + d \implies (I - A) x = d \implies x = (I - A)^{-1} d = L dx=Ax+d⟹(I−A)x=d⟹x=(I−A)−1d=Ld
xxxAAAddd

The Leontief system. Total output is the Leontief inverse LLL times final demand.

1

Replace observed flows with the product of technical coefficients and outputs.
Substitute zij=aijxj into the accounting identity: xi=∑jaijxj+di\text{Substitute } z_{ij} = a_{ij} x_j \text{ into the accounting identity: } x_i = \sum_j a_{ij} x_j + d_iSubstitute zij​=aij​xj​ into the accounting identity: xi​=j∑​aij​xj​+di​

2

The vector of total outputs is the sum of intermediate demand (AxAxAx) and final demand (ddd).
In matrix form: x=Ax+d\text{In matrix form: } x = Ax + dIn matrix form: x=Ax+d
xxxAAAddd

3

Rearranging. The matrix (I−A)(I - A)(I−A) is called the Leontief matrix. Its invertibility determines whether the multiplier exists.
(I−A)x=d(I - A) x = d(I−A)x=d
AAAxxxddd

4

Neumann series (matrix geometric series). Converges if and only if the spectral radius ρ(A)<1\rho(A) < 1ρ(A)<1.
Claim: (I−A)−1=∑k=0∞Ak=I+A+A2+A3+⋯\text{Claim: } (I - A)^{-1} = \sum_{k=0}^{\infty} A^k = I + A + A^2 + A^3 + \cdotsClaim: (I−A)−1=k=0∑∞​Ak=I+A+A2+A3+⋯
AAA

5

Since AAA is non-negative and each column sums to less than 1 (there is positive value added in every sector), the Perron-Frobenius theorem guarantees ρ(A)<1\rho(A) < 1ρ(A)<1. The series converges.
Proof of convergence: A≥0,  ι′A<ι′  ⟹  ρ(A)<1\text{Proof of convergence: } A \geq 0, \; \iota' A < \iota' \implies \rho(A) < 1Proof of convergence: A≥0,ι′A<ι′⟹ρ(A)<1
AAAι\iotaιρ(A)\rho(A)ρ(A)

6

Every element of the Leontief inverse is non-negative and at least as large as the corresponding element of III. This means every sector needs at least as much total output as its direct final demand.
L=(I−A)−1≥I(element-wise)L = (I - A)^{-1} \geq I \quad (\text{element-wise})L=(I−A)−1≥I(element-wise)
L=(I−A)−1L = (I - A)^{-1}L=(I−A)−1

Economic meaning of rounds

Round 0 (III): the sector produces its own final demand. Round 1 (AAA): it buys intermediate inputs from all sectors. Round 2 (A2A^2A2): those suppliers buy from their suppliers. Round kkk (AkA^kAk): the kkk-th tier of the supply chain. Each round is smaller than the last because some value leaks to value added (wages, profits) at each stage. The total is the infinite sum, but in practice 4 - 6 rounds capture over 95% of the multiplier.

Notations

xxx

Total output vector

ddd

Final demand vector

AAA

Technical coefficient matrix

L=(I−A)−1L = (I - A)^{-1}L=(I−A)−1

Leontief inverse

ρ(A)\rho(A)ρ(A)

Spectral radius

ι\iotaι

Vector of ones

About these symbols

Total output vector: n×1n \times 1n×1 vector of total outputs

Final demand vector: n×1n \times 1n×1 vector of final demands

Technical coefficient matrix: n×nn \times nn×n technical coefficient matrix

Leontief inverse: Leontief inverse

Spectral radius: spectral radius of AAA

Vector of ones: vector of ones

    Transition checks

    Comparative-static map
    E(θ)={x:F(x;θ)=0},θ0↦E(θ0), θ1↦E(θ1)E(\theta)=\{x: F(x;\theta)=0\},\qquad \theta_0\mapsto E(\theta_0),\ \theta_1\mapsto E(\theta_1)E(θ)={x:F(x;θ)=0},θ0​↦E(θ0​), θ1​↦E(θ1​)
    xxx

    The plotted object solves an equilibrium system at each parameter vector. A path would require an additional law of motion, such as xt+1=G(xt,θ)x_{t+1} = G(x_t, \theta)xt+1​=G(xt​,θ). Without that law, the model identifies endpoints but not the adjustment between them.

    Read a parameter move as a new equilibrium or schedule position. The segment between two saved scenarios is not a transition law.

    Do not infer speed, overshooting, or smooth adjustment from a static schedule shift.

    Variable timing

    Equilibrium object

    F(x∗;θ)=0F(x^*;\theta)=0F(x∗;θ)=0
    xxx

    A point or schedule is solved at the current parameter vector. It is not dated unless the model adds a transition law.

    Parameter move

    θ0↦θ1\theta_0\mapsto\theta_1θ0​↦θ1​

    The parameter changes the solved object immediately in the diagram; the diagram does not say how institutions implement that change.

    Keep going

    Read next

    Continue with a related concept, model, or example.

    Policy

    Trade Policy

    leads into Leontief Input-Output

    Step back →
    Theory model

    IS-LM Model

    a well-connected theoretical model two steps from here

    New angle: theoretical model →
    Macro by Mark
    帮助
    隐私政策使用条款伦理与合规

    © 2026 Mark Jayson Nation LLC